AISI S7 Tool Steel Properties, S7 Material Heat Treating Hardness vs H13 Tool Steel Properties, Material Hardness Range & Equivalent
Сводка
AISI S7 Tool Steel Properties, S7 Material Heat Treating Hardness and H13 Tool Steel Properties, Material Hardness Range & Equivalent are both steel alloys commonly used in engineering applications.
Key Differences
- ◆ {'alloy_a': '2.17E+3 MPa', 'alloy_b': 'N/A', 'property': 'Tensile Strength'}
- ◆ {'alloy_a': '1.45E+3 MPa', 'alloy_b': 'N/A', 'property': 'Yield Strength'}
- ◆ {'alloy_a': 'N/A', 'alloy_b': 'N/A', 'property': 'Hardness (Brinell)'}
- ◆ {'alloy_a': 'N/A', 'alloy_b': 'N/A', 'property': 'Density'}
- ◆ {'alloy_a': 'N/A', 'alloy_b': 'N/A', 'property': 'Melting Point'}
- ◆ {'alloy_a': '10/10', 'alloy_b': '5/10', 'property': 'Strength Rating'}
- ◆ {'alloy_a': '3/10', 'alloy_b': '3/10', 'property': 'Corrosion Rating'}
- ◆ {'alloy_a': '9/10', 'alloy_b': '9/10', 'property': 'Cost Rating'}
- ◆ {'alloy_a': '6/10', 'alloy_b': '6/10', 'property': 'Machinability Rating'}
- ◆ {'alloy_a': '7/10', 'alloy_b': '7/10', 'property': 'Temperature Rating'}
- ◆ {'alloy_a': '5/10', 'alloy_b': '5/10', 'property': 'Weight Rating'}
Сравнение рейтингов
Прочность
AISI S7 Tool Steel Properties, S7 Material Heat Treating Hardness
10/10
H13 Tool Steel Properties, Material Hardness Range & Equivalent
5/10
Коррозионная стойкость
AISI S7 Tool Steel Properties, S7 Material Heat Treating Hardness
3/10
H13 Tool Steel Properties, Material Hardness Range & Equivalent
3/10
Лёгкий вес
AISI S7 Tool Steel Properties, S7 Material Heat Treating Hardness
5/10
H13 Tool Steel Properties, Material Hardness Range & Equivalent
5/10
Обрабатываемость
AISI S7 Tool Steel Properties, S7 Material Heat Treating Hardness
6/10
H13 Tool Steel Properties, Material Hardness Range & Equivalent
6/10
Экономическая эффективность
AISI S7 Tool Steel Properties, S7 Material Heat Treating Hardness
9/10
H13 Tool Steel Properties, Material Hardness Range & Equivalent
9/10
Термостойкость
AISI S7 Tool Steel Properties, S7 Material Heat Treating Hardness
7/10
H13 Tool Steel Properties, Material Hardness Range & Equivalent
7/10
Сравнение свойств
| Property | AISI S7 Tool Steel Properties, S7 Material Heat Treating Hardness | H13 Tool Steel Properties, Material Hardness Range & Equivalent |
|---|---|---|
| Основной металл | Steel | Steel |
| Предел прочности на растяжение | 2170.0 MPa | — |
| Предел текучести | 1450.0 MPa | — |
| Относительное удлинение | 7.0 % | — |
| Твёрдость (по Бринеллю) | — | — |
| Модуль упругости | — | — |
| Плотность | — | — |
| Температура плавления | — | — |
| Теплопроводность | — | — |
| Сваривается | — | — |
| Поддаётся термообработке | — | — |
| Магнитный | — | — |
Когда применять AISI S7 Tool Steel Properties, S7 Material Heat Treating Hardness
Choose S7 Tool Steel when you need superior strength.
Когда применять H13 Tool Steel Properties, Material Hardness Range & Equivalent
Choose H13 Tool Steel when your application specifically requires this steel alloy's unique combination of properties and industry certifications.
Frequently Asked Questions
Which is stronger, S7 or H13?
Based on overall strength ratings, S7 is stronger. S7 scores 10/10 and H13 scores 5/10 on the strength scale. Check specific tensile and yield values for your load case.
Does S7 or H13 have better corrosion resistance?
Both alloys share the same corrosion resistance rating of 3/10.
Is S7 or H13 easier to weld?
Weldability data is not available for both alloys. In terms of machinability, S7 scores 6/10 and H13 scores 6/10.
Which is more cost-effective, S7 or H13?
Both alloys are similarly priced with a cost rating of 9/10.
Can I use S7 instead of H13 for structural applications?
S7 has a strength rating of 10/10 versus 5/10 for H13. Always validate substitution against your specific design codes and operating conditions.